4-Flute Short-Flute Round-Nose Bevel-Neck End Mill
1. The tool is covered with TixSiN coating, which contains high silicon content and has high temperature resistance.
2. Has good wear resistance and service life
3. High-precision tool diameter tolerance and good cutting stability
Applicable materials: tool steel, alloy steel, stainless steel, cast iron, welding repair steel
| model | diameter | round nose angle | Blade length | Shank diameter | Number of blades | full length | Effective length |
|---|---|---|---|---|---|---|---|
| 020024 | 2 | 0.2R | 2 | 4 | 4 | 50 | 6 |
| 020034 | 2 | 0.3R | 2 | 4 | 4 | 50 | 6 |
| 020054 | 2 | 0.5R | 2 | 4 | 4 | 50 | 6 |
| 030024 | 3 | 0.2R | 3 | 6 | 4 | 50 | 9 |
| 030034 | 3 | 0.3R | 3 | 6 | 4 | 50 | 9 |
| 030054 | 3 | 0.5R | 3 | 6 | 4 | 50 | 9 |
| 030104 | 3 | 1R | 3 | 6 | 4 | 50 | 9 |
| 040024 | 4 | 0.2R | 4 | 6 | 4 | 50 | 12 |
| 040034 | 4 | 0.3R | 4 | 6 | 4 | 50 | 12 |
| 040054 | 4 | 0.5R | 4 | 6 | 4 | 50 | 12 |
| 040104 | 4 | 1R | 4 | 6 | 4 | 50 | 12 |
| 050034 | 5 | 0.3R | 5 | 6 | 4 | 50 | 15 |
| 050054 | 5 | 0.5R | 5 | 6 | 4 | 50 | 15 |
| 050104 | 5 | 1R | 5 | 6 | 4 | 50 | 15 |
| 060024 | 6 | 0.2R | 6 | 6 | 4 | 50 | 18 |
| 060034 | 6 | 0.3R | 6 | 6 | 4 | 50 | 18 |
| 060054 | 6 | 0.5R | 6 | 6 | 4 | 50 | 18 |
| 060104 | 6 | 1R | 6 | 6 | 4 | 50 | 18 |
| 060204 | 6 | 2R | 6 | 6 | 4 | 50 | 18 |
| 080034 | 8 | 0.3R | 8 | 8 | 4 | 60 | 20 |
| 080054 | 8 | 0.5R | 8 | 8 | 4 | 60 | 20 |
| 080104 | 8 | 1R | 8 | 8 | 4 | 60 | 20 |
| 080204 | 8 | 2R | 8 | 8 | 4 | 60 | 20 |
| 100054 | 10 | 0.5R | 10 | 10 | 4 | 75 | 25 |
| 100104 | 10 | 1R | 10 | 10 | 4 | 75 | 25 |
| 100154 | 10 | 1.5R | 10 | 10 | 4 | 75 | 25 |
| 100204 | 10 | 2R | 10 | 10 | 4 | 75 | 25 |
| 100304 | 10 | 3R | 10 | 10 | 4 | 75 | 25 |
| 120054 | 12 | 0.5R | 12 | 12 | 4 | 75 | 30 |
| 120104 | 12 | 1R | 12 | 12 | 4 | 75 | 30 |
| 120154 | 12 | 1.5R | 12 | 12 | 4 | 75 | 30 |
| 120204 | 12 | 2R | 12 | 12 | 4 | 75 | 30 |
| 120304 | 12 | 3R | 12 | 12 | 4 | 75 | 30 |
© LV INTERNATIONAL CO., LTD. All Right Reserved.
